Skip to main content

📣 Firmware Update Release:
Firmware Version v0.13 is now released! Please follow the link here or update via Cloudloop Device Manager.

Compliance

Compliance details for RockBLOCK PRO

The following references and compliance details are supported by test reports from accredited third party laboratories.

RegionConformityReferenceRR Mini compliant with:
United KingdomUKCADownload DoCSee DoC
EuropeCEDownload DoCSee DoC
REDIridium testingETSI EN 301 441: V2.1.1 (2016-06)
BLE testingETSI EN 300 328: V2.2.2 (2019-07)
GNSS testingETSI EN 303 413: V1.2.1 (2021-04)
EMCEN 55032: 2015 A1: 2020, EN 55035: 2017 A11: 2020, ETSI EN 301 489-1: V2.2.3 (2019-11), ETSI EN 301 489-19: V2.2.1 (2022-09) and ETSI EN 301 489-20: V2.2.1 (2021-11)
Human exposure to RF EM fieldsEN 50655 (at 1m distance assuming continuous exposure of 6 minutes or more)
USFCCRefer to FCC Suppliers DoC below
Installed RF modulesContains FCC ID: Q63-9770 & QOQ-GM220P
BLE testingFCC 47 CFR Part 15C (2023)
BLE+Iridium simultaneous testingFCC 47 CFR Part 25 (2022), FCC 47 CFR Part 2 (2023)
Unintentional RadiatorsFCC 47 CFR Part 15B
Human exposure to RF EM fieldsFCC CFR Title 47 Part 1.1307 (at 1m minimum distance)
CanadaICCanada ISED compliance to CAN ICES-003(A)
Installed RF modulesContains IC ID: 4629A-9770 & 5123A-GM220P
BLE testingISED RSS-247, Issue 3 (08-2023) and ISED RSS-GEN: Issue 5 (2018-04) + A2 (2021-02)
BLE+Iridium simultaneous testingISED RSS-170: Issue 4 (09-2022) and ISED RSS-GEN: Issue 5 (04-2018) + A2 (02-2021)
Unintentional RadiatorsICES 003 2023 and issue 7 from October 2020
Human exposure to RF EM fieldsISED RSS-102 Issue 6 (6 minutes or more at 1m distance)
AustraliaACMARCM marked (ABM 81145810206)Including ARPANSA Radio Protection Series S-1 (at 1m distance)
New ZealandRSMRCM marked (Supplier number E20607)
All regions listed aboveSAFETYThird party tested to EN IEC 62368-1 Download CB test certificateFulfils the requirements of EN IEC 62368-1:2020+A11:2020, BS EN IEC 62368-1:2020+A11:2020, AS/NZS 62368.1:2022, CSA/UL 62368-1:2019

Note: As the PRO OEM is not supplied with an enclosure only the electrical aspects of EN IEC 62368-1 have been tested.

FCC Supplier's Declaration of Conformity

47 CFR § 2.1077 Compliance Information Unique Identifier: RockBLOCK PRO (FP-RB-PRO-ANT, FP-RB-PRO-SMA)

Responsible Party: Ground Control Systems 4650 Polaris Ave, Suite A, Las Vegas, Nevada 89103

This device complies with Part 15B of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.