Skip to main content

Compliance

Compliance details for RockREMOTE Mini

The following references and compliance details are supported by test reports from accredited third party laboratories.

RegionConformityReferenceRR Mini compliant with:
United KingdomUKCADownload DoCSee DoC
EuropeCEDownload DoCSee DoC
REDIridium testingETSI EN 301 441: V2.1.1 (2016-06)
BLE testingETSI EN 300 328: V2.2.2 (2019-07)
GNSS testingETSI EN 303 413: V1.2.1 (2021-04)
Human exposure to RF EM fieldsEN 50655 (at 1m distance)
USFCCRefer to FCC Suppliers DoC below
Installed RF modulesContains FCC ID: Q63-9770 & QOQ-GM220P
BLE testingFCC 47 CFR Part 15C (2023)
BLE+Iridium simultaneous testingFCC 47 CFR Part 25 (2022), FCC 47 CFR Part 2 (2023)
Human exposure to RF EM fieldsFCC CFR Title 47 Part 1.1307 (at 1m distance)
CanadaICCanada ISED compliance to CAN ICES-003(A)
Installed RF modulesContains IC ID: 4629A-9770 & 5123A-GM220P
BLE testingISED RSS-247 Issue 3 (08-2023) ISED RSS-GEN: 2023, Issue 3 (2023-08) and Issue 5 (2018-04) + A2 (2021-02)
BLE+Iridium simultaneous testingISED RSS-170 Issue 4 (09-2022), ISED RSS-247, Issue 3 (08-2023) and ISED RSS-GEN: Issue 5 (2018-04) + A2 (2021-02)
Human exposure to RF EM fieldsISED RSS-102 Issue 6 (at 1m distance)
AustraliaACMARCM marked (ABM 81145810206)Including ARPANSA Radio Protection Series S-1 (at 1m distance)
New ZealandRSMRCM marked (Supplier number E3450)Including NZS 2772: Part 1 (at 1m distance 6 min or more)
All regions listed aboveSafetyThird party tested to EN IEC 62368-1 Download CB test certificateFulfils the requirements of EN IEC 62368-1:2020+A11:2020, BS EN IEC 62368-1:2020+A11:2020, AS/NZS 62368.1:2022, CSA/UL 62368-1:2019

Note: As the Mini OEM is not supplied with an enclosure only the electrical aspects of EN IEC 62368-1 have been tested.

FCC Supplier's Declaration of Conformity

47 CFR § 2.1077 Compliance Information Unique Identifier: RockREMOTE Mini (FP-RR-MINI, FP-RR-MINI-FS, FP-RR-OEM)

Responsible Party: Ground Control Systems 4650 Polaris Ave, Suite A, Las Vegas, Nevada 89103

This device complies with Part 15B of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.