Power and Communication
Power
The RockFLEET is designed to be attached to mains power for most of the time. However, the device also features an internal rechargeable battery that's used should external power be lost. Battery life depends on how the RockFLEET is configured (Report Frequency, GPS modes etc.). Please check Battery Life Expectations for this data.
To attach the device to mains power, simply wire the positive and negative cores of the cable into your power supply. The device will run on any voltage between 8V and 32V. It will draw a maximum of about 700mA under normal operation.
Input voltage | DC (8-32V) |
Power consumption | 700mA max at 12V, plus very low current sleep mode (<30mA) |
Power Supply Protection and Compliance
For compliance purposes, it is mandatory that the device’s power supply is protected by a 2A fuse installed in line with the positive supply.
Communication
Iridium Modem | 9602 Short Burst Transceiver |
Iridium Antenna | Maxtena 1621 patch antenna |
Product Options
GSM, serial communications, Bluetooth LE 9-30V power input, various mounting bracket options