Skip to main content

Configure YB

YB Transmission and Configuration Details

In the Configure YB window the following information is displayed:

configure-yb.png

Last Configuration Command

Displays date/time of your tracker's last configuration command.

Last Transmission

Displays date/time of your tracker's last transmission. This includes any messages, mailbox checks, Yblog posts, social media posts, position reports and alerts.

YB Battery

The status of your tracker's battery at the time of its last transmission.

Transmission Frequency

This drop-down menu allows you to set your tracker's Transmission Frequency

configure-tracking.png

Calculating Credit Use

Each position transmitted from your trackers costs 1 credit. The table below shows the number of credits used in a 24-hour period at the different transmission rate options.

FrequencyPositions in 24hr Period
5 Minutes288
10 Minutes144
15 Minutes96
20 Minutes72
30 Minutes48
Hourly24
90 Minutes16
2 Hours12
4 Hours6
6 Hours4
8 Hours3
12 Hours2

When setting the Transmission Frequency keep in mind that:

  • Shorter transmission frequencies cost more credits and use up more battery.
  • Longer transmission frequencies are more cost effective and battery friendly, but may not send information back or receive messages as often as you'd like. You may have to rely on manual transmissions.

What Time Does a Unit Automatically Transmit?

The transmission frequency is based on midnight (00:00) UTC. If the tracker is set to 12 hour tracking, then it will transmit at 00:00 and mid-day (12:00) UTC. If the tracker is set to 8 hour tracking, then it will transmit at 00:00 UTC, 08:00 UTC, and 16:00 UTC.

Being in a different time zone or daylight saving time does not affect when a transmission is placed, it is always scheduled using UTC.

YB3 Users

When YB3s are not connected to external power, commands/messages are only received during automatically scheduled transmissions.

For example, if the tracker is set to 12-hour transmissions and you send a new transmission figuration at 08:00 UTC from the YBlog back-end, the YB3 will not receive that command and change configuration until 12 am UTC.

When YB3s are connected to external power, commands/messages are sent/received immediately.

YB3i Users

If you own a YB3i, and it is externally powered, commands/messages are sent/received immediately.